Upskillable

Industries / Industrial automation

The AI-native LMS for industrial automation teams.

Equipment, engineering guidance and procedures keep changing. Keep technicians and engineers ready with Living Courses built from your own approved documents, and an AI Coach they can ask while they do the work.

Living CourseRobot cell startup to handover
  1. Verify the safety circuit and interlocks
  2. Confirm I/O mapping against the approved drawing
  3. Run the dry cycle and record results
  4. Complete the handover evidence

The drawing shows a new gripper sensor. What changed in the I/O check?

AI Coach

Revision C adds the gripper-closed sensor. Verify it before the dry cycle, then record the result on the handover sheet.

Commissioning procedure, rev C
Illustrative: a job in progress, with the AI Coach answering from the course source.

01 / What teams need

How do industrial automation teams keep training current?

Industrial automation teams keep training current by connecting each course to approved engineering documents, reviewing every proposed change with a subject-matter owner, applying the approved update to the existing Living Course, and giving technicians an AI Coach that answers from that released course content on the job.

Keep learning current

Engineering changes, new equipment and revised procedures reach the course as reviewed updates, so people are not trained on an earlier revision.

Get people productive sooner

Give new and cross-trained technicians your own procedures and an AI Coach to ask first, before a routine question reaches a senior engineer.

See readiness before the job

Connect each job task to the skills it requires, and review assessment and evaluation evidence, not only course completion.

02 / Connected to your own sources

Built from the documents your engineers already trust.

Generate Studio turns the sources you select into courses, job aids, slides, videos and branching scenarios. Your team reviews and edits everything before release, and the learning stays connected to those sources.

  • Engineering specifications
  • Equipment manuals
  • Commissioning checklists
  • Site acceptance procedures
  • Service bulletins
Upskillable Generate Studio home screen asking What do you want to make, with a safety checklist selected as the source and a prompt to turn it into a short course
Product capture · Generate Studio home with one selected source. Sample content shown.
Explore Generate Studio

03 / Reviewed updates

When the engineering changes, the course changes with it.

A change is prepared for review. Once your course team approves it, the update is applied to the existing Living Course. Nothing is published without that review.

CourseLessonsUpdatesAI Coach
ReviewedTopic update

An engineering change was approved

The course team reviewed the revised I/O check and applied it to this course.

Commissioning procedure, rev CSelected by the course team
Applied to this course
Illustrative reviewed update in an existing course.
Explore Living Courses

04 / In the flow of work

Answers at the cell, not back at the desk.

Technicians ask the AI Coach about the released course while they work, by text or, in enabled workspaces, by voice. Answers draw on the course content and its cited sources.

LESSON / I/O VERIFICATION

What changed in revision C?

The revised procedure adds a gripper sensor check before the dry cycle.

Course source
AI Coach

Revision C adds the gripper-closed sensor check. Here is where it fits in the startup sequence…

ExplainSocraticCoachQuizTeach-back
What should I record for handover?
Illustrative AI Coach exchange grounded in the lesson.
LESSON STAYS IN VIEW

Before the dry cycle

Confirm the I/O mapping, then follow your approved safety procedure.

“What do I verify first?”
Talk through the lessonVoice in enabled workspaces
Illustrative voice scene in an enabled workspace.

05 / Readiness evidence

Know who is ready before the next project.

Goals connect a business priority to the skills and courses behind it, so you can see coverage across teams and sites before you assign the work.

Actual Goals coverage workspace with business goals, linked capabilities, skills, and courses
Product capture · Goals coverage. Local demonstration data.
Explore Skills

06 / Where to begin

Start with one workflow.

Pick one cell or controls family and one startup-to-handover workflow. Build the Living Course from its approved procedure, let technicians learn and ask the AI Coach, and agree up front what you will measure.

  • What to measureFirst-pass site acceptance
  • What to measureAvoidable rework hours
  • What to measureSenior-engineer time on routine questions

These are measures to agree and baseline with you, not promised results. Living Courses supplement your approved safety procedures and qualified-person assessment. They do not replace them.

A few practical questions

Industrial automation, in plain language.

What is an AI-native LMS for industrial automation?

Upskillable is an AI-native LMS that turns a company's approved engineering documents into Living Courses, supports technicians with an in-course AI Coach, and connects job tasks to skills evidence. Automation OEMs and system integrators can start with one workflow, such as a startup-to-handover procedure.

How do courses stay current when equipment or procedures change?

Changes are prepared for review. When the course team approves a change, it is applied to the existing Living Course. New information does not become published learning without that review.

Can technicians use the AI Coach on the job?

Yes. Learners can ask the AI Coach about a released course by text, and by live voice in enabled workspaces. The AI Coach uses the course content, its sources and relevant learner context. It supports approved safety procedures and qualified-person assessment. It does not replace them.

Which documents can we build automation training from?

Generate Studio works from the documents your team selects, such as engineering specifications, equipment manuals, commissioning checklists and service bulletins. It creates courses, documents, slides, videos, animations, podcasts, mind maps and branching scenarios that your team reviews and edits before release.

Can we start alongside our existing LMS?

Start with a focused use case alongside your existing LMS. We confirm the required connections, access and implementation scope before proposing the rollout.

Your starting point

Start with one workflow your team runs every week.

Tell us the role, the procedure and the measure. We will scope the first Living Course around it.

Get estimate